The SWZ-HD camera uses multiple lenses and sensors to provide a stepped zoom effect, minimising the size requirement and maximising low light sensitivity.
The SWZ-HD utilises three 1080p imaging sensors, each with a resolution of two mega pixels, these are switched into the integrated ONVIF compliant H.264 encoder.
Each sensor is paired with a lens of differing focal length, providing a 10x optical zoom from a 50mm diameter package.
As standard the SWZ-HD is shipped with 8, 16 & 35mm lenses, providing fields of view from 40° down to 8°. The simple construction of these prime lenses increases the effective aperture, allowing far more light to hit the sensor than would be possible with a conventional optical zoom or varifocal lens.
A PoE variant of the camera is also available. Internal recording is supported by a 32GB SD card, recorded files are retrieved via FTP transfer or through the use of VE software applications.
Configuration is supported via the camera’s embedded web pages or via the ONVIF interface.
PTZ control is integrated into the TCP/IP connection and also through the ONVIF control channel.
With its internal slip ring the SWZ-HD offers continuous pan and 250° of tilt. The unit is mounted in an environmentally sealed IP65 CNC machined housing.
Sensors | 3 x 2 Mega Pixels | Pan Range | 360º |
Sensitivity |
<0.1Lux |
Tilt Range |
250º |
Resolution |
1920 x 1080p30 |
Protocols |
RTSP Over TCP or UDP |
Max Bit Rate |
10Mb/s |
VMS Compliance |
ONVIF, Milestone |
Encoding |
H.264/MJPEG |
Power Use |
<2W |
Fields of View |
40º 17º & 8º Horizontal |
Casing |
Aluminium |
Lens Mount |
M12 |
Environmental |
IP65 |
Storage |
32GB Micro SD Card |
Dimensions |
ø50 x 75mm |
SWZ-HD Camera
Passive PoE Cable Set
Fischer to Cat 6 Cable
Mains Power Supply with Adaptors
Joby Micro Tripod
Support Software and Documentation
Foam Lined Case